Installing Wood Flooring

As you get ready to install a wood floor, it is helpful to have some background information on wood flooring installation. Here is a basic look at what you need to do when installing wood flooring.

Before installing a hard wood floor, you have to make sure that you have a good base. The base should be clean, smooth, and level, as well as sound structurally before beginning.

The next part of your wood floor insulation is to get the wood adjusted to the climate of the building it is going into. Let it sit inside for a few days so that is can get adjusted.

The next step in installing your wood flooring is to cover the subfloor with asphalt felt. Tack it down. Then mark with a chalk line where to lay your boards, leaving a ½” gap between the boards and the wall to allow for expansion. Pick the longest or widest planks for the first row; drill pilot holes, then face-nail the first row through the subfloor into the joists. Continue adding rows, leaving the set amount of expansion space as recommended by the manufacturer.

If you are looking at installing a wood floor over concrete, you will need to do some prep work first. Ask the manufacturer how to install the wood floor over concrete, and find out if there are any specific cleaners or sealers that you need to use before beginning.

Installing wood laminate flooring is a quick and easy way to get the look of wood flooring. You can install laminate wood flooring in almost any room of your home. Before installing laminate wood flooring, read the directions carefully. Some products require glue, while others do not. If you are doing a wood laminate floor installation over concrete, you may have to prep the concrete first. Most laminate flooring requires you to leave an expansion space around the room, so take this into consideration as well. In most cases, the laminate boards are designed to snap or slide together and do not need to be attached to the subfloor in any way.

For the best information on how to install wood flooring, always contact the manufacturer. They will no the specific tendencies of their product, and will be able to give you the specific information on how to install it, the prep work you need, and any finishes that you will need to apply to keep your wood flooring looking its best.